The Parts Pack is a good way to make sure your injector project won't get delayed due to loosing a Check Ball, breaking a small dowel pin, stripping a screw head, or breaking an O-ring. Though you probably won't need any of these parts, they are common parts that you might break or loose during your injector modifying/rebuilding.

What you’ll find in the DIY Parts Pack:

• 4 new Injector Solenoid screws.
• 4 new Adapter screws.
• 4 new long dowel pins.
• 2 new short dowel pins.
• 2 new check balls.
• 2 Armature screws.
• 1 set of External o-rings.

• 1 set of Internal o-rings.